DigiMax Pro Vs Consumer Mode
From WikiRecording
Citation
This article is based on a PreSonus manual and are used with the kind permission from the people at PreSonus.
WikiRecording thanks PreSonus for their support of our community.
The original manuals can be found at PreSonus's Technical Support Website.
PreSonus Audio Electronics, Inc is not responsible for the content of this article.
The Digimax is shipped in Pro (AES/EBU) mode (Bottom). To change to Consumer (S/PDIF) mode, follow the jumper settings in the top picture. Be sure to note that the copper on the jumpers faces the direction that is shown as correct. If the jumper were to be turned 90 degrees, the unit will not operate properly (or not at all). Please note that the jumpers are black and not red. The red is just for emphasis here. Also, make sure that you change all 5 jumpers; 4 double jumpers and 1 single.
